Problème : Vous essayez d'activer la traduction des médias pour utiliser des images différentes selon la langue, mais depuis le sous-menu WPML → Media Translation, il est indiqué "Installation requise" au lieu de voir une page de configuration des traductions des médias. Solution : - Désactivez temporairement tous les plugins. - Accédez à WPML > Media Translation. L'assistant de configuration devrait alors apparaître. - Lancez l'assistant de configuration pour terminer la configuration initiale de Media Translation. - Réactivez les plugins après la configuration. Une fois la configuration terminée, le plugin devrait fonctionner normalement.
Si cette solution ne résout pas votre problème ou semble dépassée, nous vous recommandons de vérifier les problèmes connus, de vérifier la version du correctif permanent et de confirmer que vous avez installé les dernières versions des thèmes et plugins. Si le problème persiste, n'hésitez pas à ouvrir un nouveau ticket de support sur notre forum d'assistance.
Problème: Vous rencontrez des problèmes avec des images qui ne s'affichent pas correctement et changent de langue après quelques heures, ainsi que des ancres et des sous-sections qui ne fonctionnent pas comme prévu dans vos modèles d'article en français et en allemand. Solution: Pour résoudre ces problèmes, nous vous recommandons de suivre ces étapes : 1. Vérifiez si l'image est définie sur un widget, un modèle spécifique ou un champ ACF et si le problème se produit également avec une image ajoutée sur un simple bloc WordPress. 2. Utilisez un plugin comme Duplicate Post pour dupliquer la page et vérifier si le problème persiste sur la duplication. 3. Testez dans un environnement minimal : - Désactivez tous les plugins à l'exception des plugins WPML. - Passez temporairement à un thème WordPress par défaut, tel que Twenty Twenty-one. - Si le problème disparaît, réactivez les plugins un par un pour identifier le plugin causant l'interaction. 4. Allez dans WPML > Support > Troubleshooting, sélectionnez Media pour la synchronisation de la taxonomie et essayez tous les boutons suivants : https://prnt.sc/TC5dFJLNi8jH
Si ces étapes ne résolvent pas le problème ou si elles semblent obsolètes ou inapplicables à votre cas, nous vous recommandons vivement de vérifier les problèmes connus sur https://wpml.org/known-issues/, de vérifier la version du correctif permanent et de confirmer que vous avez installé les dernières versions des thèmes et plugins. Si le problème persiste, n'hésitez pas à ouvrir un nouveau ticket de support sur notre forum de support.
Problem: You are experiencing issues where translations revert to older versions or to automatic translations, even though you have stopped the automatic translation process. Solution: If you're facing this issue with specific phrases or words reverting, we recommend using a glossary to manage your translations more effectively. A glossary can help ensure that your preferred translations are used consistently. For guidance on setting up and managing a glossary, please visit how to create and manage glossary entries.
Please note that this solution might be outdated or not applicable to your specific case. We highly recommend checking related known issues at https://wpml.org/known-issues/, verifying the version of the permanent fix, and confirming that you have installed the latest versions of themes and plugins. If the issue persists, please open a new support ticket at WPML support forum for further assistance.
Problem: If you're experiencing issues where new components added to an existing page in English are not automatically added to the German version of your website, despite using full automatic translation, this might be due to specific settings. Solution: We recommend checking your WPML settings to ensure that they are configured to: 1. Translate Everything Automatically; 2. Publish right away without reviewing; These settings can be found under WPML > Settings. Additionally, it's possible that the content that was automatically translated is waiting for approval. You can verify this in WPML > Translations.
If this solution does not resolve your issue or seems irrelevant due to being outdated or not applicable to your case, we highly recommend opening a new support ticket. Also, please check related known issues at https://wpml.org/known-issues/, verify the version of the permanent fix, and confirm that you have installed the latest versions of themes and plugins. For further assistance, you can contact us directly through our support forum.
Problem: You are trying to display a page in German, but despite translations being present in the translation editor, they do not appear on the page. Instead, texts are still in French. Solution: If you're experiencing this issue, we recommend checking if you have installed the String Translation addon, which is essential for translating page content with Elementor. You can install this addon by going to Plugins > Add new > Commercial. After installation, re-translate your page. Additionally, it's a good practice to make a backup before installing new plugins.
Please note that this solution might be outdated or not applicable to your specific case. We highly recommend checking related known issues at https://wpml.org/known-issues/, verifying the version of the permanent fix, and confirming that you have installed the latest versions of themes and plugins. If the issue persists, please open a new support ticket.
Problem: The client was experiencing an issue where importing content in different languages (EN, DE, FR) using WP All Import did not create translations but instead created new posts, even with the string translation plugin disabled.
Solution: We advised the client to ensure that the 'Unique identifier' used in the import process is indeed unique for both the template and settings. This identifier should be a unique value/field from the CSV/XML file being imported. We recommended using a new field created solely for this purpose, as outlined in our documentation:
After ensuring the unique identifier is set correctly, the import should then create the translations as expected.
Please note that this solution might be irrelevant if it's outdated or not applicable to your case. If the issue persists, we highly recommend checking the related known issues, verifying the version of the permanent fix, and confirming that you have installed the latest versions of themes and plugins. If you still need assistance, please open a new support ticket in the WPML support forum.
Problem: If you're trying to translate the label of a Custom Post Type (CPT) created with the JetEngine plugin for a multilanguage site and can't find where to do it. Solution: 1. Go to WPML > Settings and under 'Post Type Translation', set the translation preference for your Post Type to "Translatable". 2. Navigate to WPML > Theme and Plugins Localization. 3. Select the JetEngine plugin and scan for strings within the plugin. 4. Once the scan is complete, move to WPML > String Translation. 5. Search for the name of your CPT. 6. If the name appears, click on the "+" icon next to it to add a translation.
If the name doesn't appear in the String Translation, it might be registered as an Admin string. In this case, you need to register the string for translation by following the instructions in our guide:
